Normal USB cables are not optimised for the highest quality audio.
The Gemini3.0 separates the audio and power cables to give you high-quality interference free audio.
Degrees of separation
The Gemini3.0 cable carries the audio signal and power in two separate cables.
This separates the delicate USB data signal from the USB power.
No interference and sound quality remains unaffected.
The golden touch
The signal runs through the cable and the connector. This means the connector too must be exceptional.
Most USB cables use moulded plastic covered connections that do not shield the high frequencies present in the USB data link. Noise radiates out. Very few make their own connectors and rely on off-the-shelf components. These often lack durability.
Our FINAL USB connectors provide impeccable end-to-end RF shielding. They are machined entirely from solid, aircraft-grade aluminium. Plus their gold-plated connections make for years of steadfast service.
USB3 Data
| Construction: | Minimum inductance parallel construction |
| Conductors: | 24 and 28AWG |
| Conductor material: | Heavy OFHC continuous cast copper silver matrix |
| Insulation: | HD Polyethylene |
| Shielding: | Quadruple-shields |
| Impedance: | 90Ohms |
| AC spark insulation : | 1500V |
| Connectors: | iFi ‘FINAL’ USB connectors |
| Insulation resistance: | 100Mohm |
| Tensile strength: | 1500PSI |
USB(Power)
| Construction: | Minimum inductance parallel construction |
| Conductors: | 12AWG |
| Conductor material: | Heavy OFHC continuous cast copper |
| Insulation: | Linear Polyethelyne (LPE) insulation |
| Current Rating: | 30A |
| Lengths/Weights: | 0.7m / 150g (0.33 lbs) |
| 1.5m / 170g (0.37 lbs) |
Pris: kr 5050,-
