Ortofon SPU Meister Silver GM MkII
The SPU Meister Silver GM MkII is an SPU Moving Coil cartridge that has been improved on coil winding material, stylus and magnet.
The cartridge has been outfitted with high purity multi-conductor 6–nines Silver wire (of a purity of 99,9999 %) for a more open and revealing high end presentation.
The nude elliptical stylus tip mass has been decreased by a factor of more than 50%, resulting in increased tracking ability and reproduction of microdynamic detail.
The generator system has been revised produce a slightly higher output to ensure compatibility with a wider range of moving coil transformers and active MC preamplifiers.
We offer Special Repair Service for SPU Meister Silver GM MkII »
|
Technical data |
|
| Output voltage at 1000 Hz 5cm/sec | 0,3 mV |
| Channel balance at 1 kHz | < 1 dB |
| Channel separation at 1 kHz | > 20 dB |
| Channel separation at 15 kHz | > 10 dB |
| Frequency range at -3 dB | 20-25 kHz |
| Frequency response 20 – 20 kHz | +2 / -1 dB |
| Tracking ability at 315 Hz at recommended tracking force *) | > 70 μm |
| Compliance, dynamic, lateral | 8 μm/mN |
| Stylus type | Nude elliptical |
| Stylus tip radius | r/R 8/18 μm |
| Equivalent stylus tip mass | 0,45 mg |
| Tracking force range | 3.0-5.0 g (30-50 mN) |
| Tracking force recommended | 4.00 g (40 mN) |
| Tracking angle | 20º |
| Internal impedance, DC resistance | 3.1 Ohm |
| Recommended load impedance | > 10 Ohm |
| Coilwire material | Silver, 6-nines |
| Cartridge body material | Grinded wood |
| Cartridge colour | Silver/Black |
| Cartridge Weight | 31.5 gram |
| *) Typical value |
.png)
