Streaming Unleashed.
Wi-Fi audio transport.
Warp speed tech.
ZEN Stream is a true ground-up design by iFi — the hardware and software implementation is quite exceptional:
- Two SuperSpeed USB3.0 ports with Active Noise Cancellation II
- S/PDIF out with the iPurifier built-in
- Power supply with Silent Power tech
- iFi software developed with Volumio open-source as the starting point, then coded and optimised by us to achieve the purest streaming software bar none
These are some of the factors behind why the ZEN Stream is at the cutting-edge handling PCM384/DSD256 on LAN and WiFi (802.11n, with 100Mbps on 5Ghz).
Who’s who of Streaming.
Hot off the press, the ZEN Stream has the following connectivity options:
- Stream straight from Spotify/Tidal apps with Spotify Connect and Tidal Connect
- Works with any DLNA certified streaming app (our own app is imminent!)
- Integrated Airplay and Chromecast* – easy streaming from Apple and Android devices
- Roon compatible – basically, it adds Roon to any DAC.
- NAA operation in conjunction with Sygnalist’s HQPlayer software
*Chromecast to come in a future update.
This is a true hi-res device. It uniquely supports PCM up to 32-bit/384kHz over Wi-Fi as well as Ethernet cable, plus DSD up to 11.2MHz (DSD256). Highly unusual in a Wi-Fi streamer.
Our ‘exclusive modes’ give you individual settings dedicated to specific modes of operation to deliver the purest possible performance.
All-in-one
This non-specific mode is great for all platforms, audio formats and devices.
DLNA streaming
Select this mode to optimise performance when using the ZEN Stream with DLNA-compatible apps and devices.
NAA streaming
Select this mode when using the ZEN Stream as a Network Audio Adapter in conjunction with Signalyst HQPlayer software.
Roon Bridge streaming
Select this mode when integrating the ZEN Stream into a ROON environment.
Tidal streaming
If you are a subscriber to Tidal’s Masters Tier, this is the mode for you.
Specs:
| Input voltage | DC 9V/1.8A-15V/0.8A AC 100 -240V, 50/60Hz |
| Input | Wi-Fi / Ethernet / USB HDD (Firmware updates via OTA and USB-C at rear) |
| Formats | PCM384 DSD256 (MQA-fully compatible) |
| Output | USB3.0 (Type-A Socket) x2 SPDIF (Coaxial) |
| Power consumption | No Signal ~6W Max Signal ~10W |
| Dimensions | 158 x 100 x 35 mm 6.2″ x 3.9″ x 1.4″ |
| Net weight | 578g (1.14 lbs) |
Pris: kr 4500,-
